coil nail introduction

Coil nail introductions:
Coil nails require the β angle is 0 to 90 degrees. Coil nails are suitable for mechanical nails and can be installed on the nail machine continuously. The advantages are to reduce physical labor and improve productivity. This utility model is widely used, especially suitable for construction, decoration, furniture, wood, packaging, automobiles and other industries.
It is composed of several single nails and connectors arranged in a set of different shapes. The connector can be copper -plated iron wire. The connector is connected to each nail angle with the nails. Loin together and roll into a volume.
Plumb use of nails:
Suitable for soft and hard wood, bamboo devices, ordinary plastic, sandwater sand, furniture, packaging wooden boxes, etc. Widely used in construction, decoration, decoration, and decoration.
Coil nails are composed of a number of single nails and connectors arranged in a set of different shapes. The connector can be copper -plated iron wire. The connector is connected to each nail in the center line of each nail pole. Candidly, then roll into a volume,
Traditional iron nails require manual hammers to enter, labor and time, and not strength .
That’s the cause of coil nail birth.
To produce coil nails, first need to produce nails, as we showed you in last news, by our nail making machines can produce high quality nails which are straight and round head.
Then to screw the nail shanks by thread roller as below:
The last process is to collate them by coil nail machine with welding wire

In order to ensure the quality of the product, you need to go to a more formal manufacturer to buy, because such manufacturers have relatively ** technology and equipment, especially the manufacturing process is relatively strict. It is placed in a suitable environment, especially in a special environment. Apply some lubricant on the surface of the product to ensure that the product may not rust.

In order to reduce the damage rate of coil nails, it is necessary to ensure that the mechanical is adjusted to the appropriate data. In this way, there will be no problem with the products made in this way.