The nail-making process of the nail-making equipment is to go through drawing first, then nail-making, and finally polishing.
No matter what kind of raw materials are selected for nailing equipment, they all have to go through wire drawing, nailing, polishing, but the nailing complete sets of equipment to choose different equipment, from the raw materials, there are new materials and waste steel bars, the difference between the two is the use of new materials to make nails, wire drawing process is selected by horizontal wire drawing machine or continuous wire drawing machine;And the selection of scrap nails, the use of the roller drawing machine.In addition, due to the different length of used steel bars, they have different feeding modes, so the wire drawing machine also needs to butt the used steel bars through the welding machine.
The process of nailing equipment goes through drawing, nailing and polishing. The main machine (nailing machine), drawing machine, straightening machine and polishing machine can be equipped in the equipment configuration xilinx .The wire drawing machine is mainly used for drawing the steel bar into the diameter of the nails needed to be made.The main purpose of straightening machine is to straighten the steel bar without bending.
Polishing machine is a machine that polishes semi-finished nails into flat nails. In the polishing machine, raw materials such as paraffin sawdust are put into the polishing machine to polish the excess filaments or edges and corners on the nails into a smooth shape.Nailing machinery is the processing of steel wire into a single nail.
Post time: Sep-13-2022