nail production process

nail production process:

1.first step is to draw the round steel dia to be the right size for nail production, After drawing, the diameter of the nail pole is pulled out,
2.Then put the wire on rod, enter the wire into the nail making machine by hand adjustment little by little, when the position ready can turn on the machine to produce.
According to our experience we suggest to use our high speed nail making machine as we showed in our website.

After nail produced we need to polish them If the surface of the nail is needed for electroplating or black hair, you can add these processes.
The production process of the nails is mainly processes such as brushed, cold, polishing and other processes, and the production process of the nails is relatively simple.

In engineering, carpentry and architecture, nails refer to pointed hard metal (usually steel), which are used as fixed wood and other objects. The hammer nails the nail into the item, and there is also a nail gun, and the gas nail gun appears. Therefore, the nails can be stabilized, and it is hung on it by its own deformation, and relying on friction.

Nails have different shapes due to many uses. The most common nails are called “wire nails”. In addition, the common nail names include large head needles, nails or cuttings. Nails are widely used, there are many use scenarios, rivets used in general aircraft carriers are more expensive, and ordinary nail prices are cheaper.
There are wide range of the nails according to different using, such as:
Twist nails, which body is like twist, the head is round -shaped, a cross or one head, and the bottom is the bottom. The nail force is particularly strong. It is suitable for some places that need to be very nail, such as drawers, wooden ceiling bars, etc. The common specifications have multiple specifications from 50 ~ 85mm.